Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
High frequency design
Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Auto recognition of external batteries
UPS recognizes when external battery packs are attached and automatically adjusts runtime.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Provides actual kilowatt hours of usage for energy conscious users.
Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Multiple switched outlet groups
Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Wide input voltage range
Designed for harsh electrical environments to save battery life.
StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
High online efficiency
Reduces utlility costs, generates less heat.
Provide easy-to-read status of the unit and utility power conditions.
Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
Customize UPS capabilities with management cards.
Provides temporary battery power when the utility power is out.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Provides notification of changing utility power and UPS power conditions
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Provides management of the UPS via a USB port (not available on all models).
Provides management of the UPS via a serial port.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Provides remote power management of the UPS over the network.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
The electrical or electronic product contains little or no Hazardous Substances (RoHS). Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component.
|BLT Item #:||BRM5754|
|Mfg. Part #:||SMX3000LVNC|
|Description:||SMART UPS X 3000VA RT 100 / 127V L5-30P LCD WITH NETWORK CARD|
|Suggested Retail Price:||$2,490.00|
|Dimensions:||25" x 23.1" x 13"|
|Brand and Item Information|
|Name:||APC SMX3000LVNC uninterruptible power supply (UPS) 3000 VA 7 AC outlet(s)|
|Brief Description:||APC SMX3000LVNC, 3000 VA, 2700 W, 70 V, 153 V, 50/60, 540 J|
|Expanded Description:||APC SMX3000LVNC. Output power capacity: 3000 VA, Output power: 2700 W, Input operation voltage (min): 70 V. AC outlet types: NEMA 5–15R,NEMA 5–20R,NEMA L5-30R, Power plug: NEMA 5-30P, Cable length: 96.1" (2.44 m). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 3 h. Form factor: Rackmount/Tower, Color of product: Black, Rack capacity: 2U. Waveform: Sine, Noise level: 55 dB|
|Warranty:||3 years repair or replace (excluding battery) and 2 year for battery, optional extended warranties available, optional on-site warranties available|
|Ports & Interfaces|
|AC outlet types:||NEMA 5–15R,NEMA 5–20R,NEMA L5-30R|
|Power plug:||NEMA 5-30P|
|Cable length:||96.1" (2.44 m)|
|AC outlets quantity:||7 AC outlet(s)|
|USB 2.0 ports quantity:||1|
|Weight & Dimensions|
|Width:||7.01" (17.80 cm)|
|Depth:||19" (48.30 cm)|
|Height:||17" (43.20 cm)|
|Weight:||85.1 lbs (38640 g)|
|Package weight:||105.2 lbs (47730 g)|
|Output power capacity:||3000 VA|
|Output power:||2700 W|
|Input operation voltage (min):||70 V|
|Input operation voltage (max):||153 V|
|Power supply input frequency:||50/60 Hz|
|Surge energy rating:||540 J|
|Emergency Power Off (EPO):||Y|
|Output voltage THD:||5 %|
|Operating temperature (T-T):||0 - 40 °C|
|Storage temperature (T-T):||-15 - 45 °C|
|Operating relative humidity (H-H):||0 - 95 %|
|Storage relative humidity (H-H):||0 - 95 %|
|Operating altitude:||0 - 118110.2" (0 - 3000 m)|
|Non-operating altitude:||0 - 590551.2" (0 - 15000 m)|
|Certification:||BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A|
|Battery technology:||Sealed Lead Acid (VRLA)|
|Number of batteries supported:||1|
|Battery recharge time:||3 h|
|Package dimensions (WxDxH):||23.1 x 24.9 x 13" (586 x 633 x 330 mm)|
|Color of product:||Black|
|Noise level:||55 dB|